If the computer is a laptop or tablet the icon will look like WiFi bars.ġb) Select the “Open Network & Internet settings” optionġc) Look for the “Change your network settings” section. If the computer is wired into the network the icon should look like a monitor with an Ethernet cable. The main network is the network scheme that was found by using the Command Prompt.ġa) Right click the network connection icon for your Windows 10 PC This step allows a user to access the IP camera to change it’s IP address to a compatible IP address for their main network. The first step to the process is to change the PC network settings to a 192.168.1.xxx network address temporarily. Change the network settings on the PC to a 192.168.1.xxx scheme Below is a step-wise overview of what to do but to get a better idea check out the video in the article that covers the process from the beginning to end. This is the most difficult section for anyone who is not an IT person or has very good computer skills. Login to the camera and configure it for the network Here is an example output of the ipconfig command from a computer in our office network. Write down or note the IP address scheme - if it is 192.168.1.xxx then a user can easily access the IP camera using the 192.168.1.109 address already and should move onto our other guides.The network scheme will be printed out inside of the console.
0 Comments
Leave a Reply.AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |